         
 |
 Series
1500
Compact Digital Flow Monitor
The Data Industrial Series 1500 Flow Monitor
is an economical, full featured, digital flow monitor.
The two line x 8 character alphanumeric display can be configured
by the user to display flow rate and flow total separately or simultaneously.
The panel meter has a NEMA 4X rated front panel and conforms to DIN
Standard dimensions, 96 mm X 96 mm, for meter sizes and panel cutouts.
Versions of the Series 1500 are also available in NEMA 4 wall mount
or sensor mount configurations.
Like all Data Industrial flow monitors, the Series 1500 may be field
calibrated by the user. Data Industrial sensors are calibrated by
entering "K" and offset numbers, while other pulse or frequency
output sensors may only use a "K" factor. The Series 1500
accepts pulse, sine wave, or an optional 4-20 mA analog input signal.
| Series 1500
w / NEMA 4X Wall Mount Enclosure |
 |
Programming is menu driven. All data is entered
using the LCD/keypad interface. A password gate is included to
prevent unauthorized access to system parameters. Programming
flexibility is extended to units of measure. Series 1500 software
contains eight flow rate and four total flow units of measure.
There is also a provision for adding custom units for rate and
total.
The Series 1500 provides two pulse outputs to interface with external
data collection devices that accept electronic pulses, one is a function
of flow rate, the other flow total. The resolution of this TTL compatible
signal may be programmed via the user interface.
Two LED's are located on the front panel. One is an indication of
power. The other is programmed to represent impeller status, totalizer
status, or alarm status.
All calibration information, units of measure and flow totals are
stored in a non-volatile memory that does not require battery back-up
for data retention.
Options:
- Control relays- SPST mechanical relays,
2 available: Fixed as 1 for rate and 1 for totalization functions.
- Analog output- isolated current sinking
4-20 mA, programmed from the keypad.
- Analog input- allows the use of other flow
devices with analog outputs.
| © Copyright 1985-2004 Data
Industrial Corp. all rights reserved |
Last updated |
|
