           
 |
 Flow
Sensors
Data Industrial impeller flow sensors offer
an accurate, repeatable, economical way to measure the flow of
liquids in any pipe, metallic or non-metallic, from 1/2" to
over 40" in diameter-even at low flow rates.
DI's unique forward-swept, six bladed impeller
design provides higher, more constant torque than four bladed impellers. Coupled
with our proprietary non-magnetic sensing mechanism, they are less prone to fouling
by particles or liquid-borne debris.
SDI Series
200
Series
| Brass,
Stainless & PVC Insert Flow Sensors |
For
general flow measurement applications in both metallic
and non-metallic pipes. Mounts in a 2" NPT Thredolet
or pipe saddle for installation. |
|
IR
Series
Flow Sensors |
"Environmentally
hardened" versions of our standard sensors,
IR Series sensors are designed for any outdoor or
underground applications where flooding or ice may
be a problem. |
|
Metallic
Tee-Type
Flow Sensors |
Brass/Bronze
or stainless steel sensors mounted in brass Malleable
iron, or stainless steel tees, with a sensor mounted
in a cast bronze housing. |
|
| Thermoplastic
Tee-Type Flow Sensors |
Combine
tees made from PVC with sensors (electronic housing)
made from PPS or PVDF for applications that use non-metallic
piping. |
|
| Wireless
Flow Sensor System |
The
wireless flow sensor system includes the flow sensor,
RF transmitter and RF receiver. Installation no longer
requires expensive trenching, drilling, or digging
to install power or I/O wiring. |
4000 Series
PVC/PVDF
Sensors |
Designed specifically for
low flow applications. PVDF versions are compatible with
all piping systems including SYGEF, KYNAR, Super Proline
and Sani-Tech. Available in 1/2", 3/4", and
1" Pipe sizes. |
| © Copyright 1997-2000
Data Industrial Corp. all rights reserved |
Last updated |
|
