Return to Home Page

Flow and Energy Metersw_senbar.gif (1099 bytes)Insertion Flow SernsorsMetallic Tee Type SensorsPVC Flow Sensors½" to 1" Flow SensorsBattery Powered SDI Insertion Flow Sensorsw_blanbar.gif (856 bytes)Digital and Analog Transmitters
Data Acquisition

Technical Support Page

Email Contacts Page

Fill Out This Form for More Info

Series 200 Irrigation
Flow Sensors

The Data Industrial IR Series flow sensors are "environmentally hardened" versions of the standard DI flow sensors. These IR versions are specifically designed for installation in underground vaults that might be subjected to flooding. The IR series feature a six bladed impeller design with a proprietary, non magnetic sensing mechanism. The impeller shape coupled with the absence of magnetic drag provides accuracy and repeatability throughout the flow range of the sensor. As the liquid flow turns the impeller, a low impedance 8 VDC square wave signal is transmitted with a frequency proportional to the flow rate. This signal can travel up to 2000 feet between the sensor and the display unit without the need for amplification. The sensors are configured with two 48 inch single conductor leads.

Applications

  1. Irrigation Systems--mounted underground in valve boxes.
  2. Municipal Water Systems--mounted in meter pits or vaults.
  3. Groundwater Monitoring-mounted on outdoor piping.
  4. Any outdoor or underground location with standing water, snow or ice problems

IR Series Flow Sensors
IR series flow sensors models are available in a variety of sizes and materials.

Available Models:

  • IR250B--Removable sensor mounted in cast bronze tee with Female NPT threads. Available Pipe sizes: 1",11/4",1 1/2" for metallic pipelines and low flow applications.
  • IR220B--Insert style brass sensor: IR-220SS- Insert style stainless steel sensor; mounts in 2" NPT Saddle or Thredolet® for all pipe materials and sizes 3" and larger.
  • IR225B--Brass insert style hot tap sensor with brass gate valve: 2" NPT.
  • IR226B--Brass insert style hot tap sensor with ball valve: 2" NPT.
  • IR226SS--Stainless steel insert style hot tap sensor with ball valve: 2" NPT.
  • IR228B-2--Tee mounted sensors consisting of a standard 220 insert sensor mounted in a 2" NPT Brass Tee.
  • IR220P--Removable sensor mounted in schedule 80, PVC Tee with socket ends. Available pipe sizes: 1 1/2", 2", 3", 4". For use with PVC piping systems.

 

 

© Copyright 1985-2004 Data Industrial Corp. all rights reserved Last updated