Series 310
Programmable Analog Transmitter

The Series 310 is a loop powered, programmable transmitter capable of converting the signal from Data Industrial flow sensors to a linear 4-20mA analog signal. In addition to our standard square wave signal, it can also accept a sine wave making it a versatile transmitter for numerous applications.
With an onboard micro-controller and digital circuitry, the 310 is programmed from a computer eliminating the need to adjust potentiometers and producing precise, accurate and drift free signals. This will save both time and money by lowering overall maintenance times. This model also has an integral filter that the user can specify as 0 (to show true sensor readings) or 10 (for maximum dampening).
The compact cast epoxy body measures 1.75" (44mm) x 2.75" (70mm) x 1" (25mm) and can easily be mounted to panels, DIN rails or enclosures. With multiple inputs, ease of use and a variety of enclosures, the Model 310 is a powerful and competitive transmitter for many of today’s demanding applications.

Units can be calibrated at our facility or easily programmed in the field. Field calibration requires a Data Industrial A310 Programming kit (consisting of a custom cable and software) and IBM compatible computer running Windows 3.1^® or Windows 9x^®. In order to calibrate, the Model 310 must be connected to the loop for power, and the A301 cable must be connected to an available 9-pin COM port on the computer.

Once the software is loaded and communications with the transmitter are established, the following parameters are entered in the setup screens:

An added feature is a user selectable filter. Set for the minimum (0) the transmitter reacts to actual flow input. Set at the maximum (10) the transmitter provides the greatest dampening possible.

Once the values are set, the "send" command loads the transmitter.

All programming can be saved with a file name for later reference.

Related Downloads: Series 310 Product Sheet Series 310 Specification Sheet Series 310 Installation and Programming Guide Programming software Model 310 programming software is available and will only work with the optional A301-20 programming cable. Combo Product Application Software for most Impeller Products: Ver 3.0 for Windows Xp/Vista (added 6/28/07)