w_homebar.gif (1028 bytes)

w_metbar.gif (1073 bytes)w_senbar.gif (1099 bytes)w_tranbar.gif (1082 bytes)310 Series320 Series
330 Series340 Series340LW Series
340N2 Series
340BN Series
340MB Series
500 Series600 Series800 Seriesw_blanbar.gif (856 bytes)
Data Acquisition

Technical Support PageEmail Contacts Page

Fill Out This Form for More Info

51010.gif (29419 bytes)Series 500
Analog Transmitter

The Series 500 Analog Transmitter is a 4-20mA current converter. It is normally used as a loop-powered device for use with all Data Industrial non-magnetic flow sensors. The transmitter is equipped with an on-board calibration frequency source. This source allows the unit to be field calibrated. It has two frequency span ranges (high and low) to provide for high resolution of the 4-20mA signal to a specific flow range.

The Series 500 is intended for use with any device that requires a 4-20mA input signal; to log or display flow rate; or as the input to a flow based process control system, PLC or CPU.
Typical examples of the kinds of systems and equipment requiring a flow signal proportional to 4-20mA are:

550-10 Circuit Board Only

 
  • Chemical Feed Systems
  • Batch Control Systems
  • Mixing/Blending Systems
  • Data Logger Systems
  • SCADA & Recorder Systems
  • Energy Management Systems
  • BTU Measuring Systems
  • Irrigation Control Systems
  • Heat Exchanger Systems

Product Features:

Model 500-10

50010.gif (24599 bytes)

User Adjustable Scale - The user can select the resolution of the 4-20mA signal from the ranges of the various pipe size configurations.
Maximum Signal Resolution - To maximize the resolution of the 4-20mA signal the 4mA value can be set to values other than Zero. The 20mA value can also be adjusted to reflect the minimum or maximum range of flow required to interface to other equipment with the analog signal.
Power Supply Options - The Series 500 is normally loop-powered, drawing the necessary power from the loop itself. If there is no loop power available, an independent power supply is available from Data Industrial.

Mounting Options - The Series 500 is enclosed in a NEMA 4X, waterproof enclosure. The Model 550 is available as an open-chassis circuit board for mounting inside another panel or enclosure.

Optional Display - The Model 510 features a 31/2 digit LCD display visible through a clear cover. The display is equipped with adjustable span and offsets for field calibration.

 

 

© Copyright 1985-2004  Data Industrial Corp. all rights reserved Last updated