      
 
   
 
 
 
 |
 Series
600
Pulse Output Transmitter
The Data Industrial Model 600 (housed) and
650 (unhoused) Pulse Output Transmitter is a compact electronic
device that receives input signals from any Data Industrial,
non-magnetic Impeller Flow Sensor. They accumulate and "divide" it
to produce an output pulse scaled to a user selectable unit of
measurement; i.e. 1 pulse per gallon, 1 pulse per cubic foot,
1 pulse per 10 meters. The scale is field set from an internal
12 position dip switch. No additional calibration device is necessary.
Like all Data Industrial products, the 600/650 may be used as a single
purpose device, providing one output from a flow sensor; or combined
with other pulse transmitters or set point controls to provide complete
data acquisition or process control from a single sensor.
 |
Model
650 |
| User
Adjustable Scale-The user
can select the units per pulse from a wide range, depending
on pipe size, from the calibration charts supplied with
the unit. The calibration is set by positioning a series
of dip switches on the circuit board. |
| 3
Types of Pulse Units- Every
model 600/650 is equipped with a TTL output. The user may
also order either a dry contact mechanical relay closure,
or an opto-isolated transistor closure. |
| Adjustable
Pulse Duration- To further
increase the flexibility of the model 600/650, the user
may select the length time that the relay is closed when
sending an output pulse. The duration varies from 0.1 second
to 1.5 seconds in increments of 0.2 seconds. Selection
is by a 3 position dip switch on the circuit board. |
| L.E.D.
Indicators- The output
from the sensor and the output pulse are displayed by LED's
on the circuit board giving visual proof of operation. |
| © Copyright 1985-2004 Data
Industrial Corp. all rights reserved |
Last updated |
|
