Home

MonitorsSensorsTransmitters310 Series320 Series330 Series340 Series340LW Series
340N2 Series
340BN Series
340MB Series
500 Series600 Series800 Seriesw_blanbar.gif (856 bytes)Data Acquisition

Technical Support PageEmail Contacts Page
Sales Reps
LinksFill Out This Form for More Info
BrochureUpcoming Shows

Analog and Digital Transmitters

 

 

 

Analog Transmitters



 

Series 310 Programmable Analog Transmitter A loop powered, programmable transmitter capable of converting the signal from Badger® Data Industrial or other manufactures flow sensors to a linear 4-20mA analog signal.
Series 500 Analog Transmitter A 4-20mA current converter. It is normally used as a loop-powered device for use with all Badger® Data Industrial non-magnetic flow sensors.

 

 

 

Btu Transmitters

 

 

Series 340 Programmable Btu  Transmitter The Badger Meter Series 340 energy transmitter is an economical, compact device for sub-metering applications.
Series 340LW Programmable Btu Transmitter The Badger Meter Series 340LW Btu transmitter is an economical, compact device for sub-metering applications requiring addressable network output capabilities using the LONWORKS® protocol.
Series 340N2 Programmable Btu Transmitter The Badger Meter Series 340N2 Btu transmitter is an economical, compact device for sub-metering applications using Johnson Controls Metasys® Network Companion™ and Facilitator™ Supervisory Systems.
Series 340BN BACnet® Btu
Transmitter		 The Badger Meter Model 340BN Btu Transmitter is an economical, compact device for sub-metering applications that utilize the BACnet® communications protocol.
Series 340MB Modbus Btu
Transmitter		 The Badger Meter Model 340MB Btu Transmitter has the same advantages of our other btu transmitters. The modbus protocol adds the ability to connect to modbus networks and our Model 3700 and Model 345WT.

 

 

Scaled Pulse Output Transmitters
 

Series 320 Programmable Pulse Output Transmitter A compact, programmable transmitter capable of converting the signal from Data Industrial or other manufactures flow sensors to a scaled units/pulse signal.
Series 600 Scaled Pulse Output Transmitter A compact electronic device that receives input signals from any Data Industrial, non-magnetic Impeller Flow Sensor. They accumulate and "divide" it to produce an output pulse scaled to a user selectable unit of measurement.

 

 

Relay Control Transmitters
 

Series 330 Local Relay Control The Model 330 is a compact, programmable relay control capable of converting the signal from a Data Industrial flow sensor into a flow switch.
Series 800 Local Adjustable Relay Control A compact single set point relay control. The LARC is designed to work with any Data Industrial nonmagnetic flow sensors to provide a simple and flexible means of control based on flow rate.

 

© Copyright 1985-2004  Data Industrial Corp. all rights reserved Last updated